HP Color LaserJet 2550 Printer series - Manual (Page 162)

Enabling memory
If the printer has a new memory DIMM installed, all Windows users of the printer must set
the printer driver to recognize the newly added memory. Macintosh computers automatically
recognize new memory.
To enable memory for Windows
1. On the Start menu, point to Settings, and click Printers or Printers and Faxes.
2. Select this printer and select Properties.
3. On the Configure tab, click More.
4. In the Total Memory field, type the total amount of memory that is now installed.
5. Click OK.
To enable memory for Mac OS
Note Enabling memory for OS X might differ from the following procedure.
1. Click the desktop printer icon.
2. From the Printing menu, select Change Setup.
152 Appendix E Working with memory ENWW