HP Color LaserJet 2550 Printer series - Manual (Page 57)

Printing on letterhead or preprinted forms
This section shows how to orient letterhead or preprinted forms when you are printing only
on one side. For duplex (two-sided printing) orientation, see
Printing on both sides
(duplexing manually) .
● Orient paper as shown in the following figures.
● If the print media is heavy, lower the rear output door to reduce curl.
● Avoid using raised or embossed letterhead.
● Avoid using letterhead that is printed with low-temperature inks, such as those used in
some types of thermography.
● The printer uses heat and pressure to fuse toner to the print media. Make sure that any
colored paper or preprinted forms use inks that are compatible with this fusing
temperature (210° C or 410° F for 0.1 second).
ENWW Printing on special media 47