HP StorageWorks XP Remote Web Console Software - Manual (Page 100)

Setting SNMP Agent Properties 100
Figure 4-3 Adding SNMP Manager IP Address (Left: Before Setting. Right: After Setting)
4-3-2 Deleting SNMP Manager IP Addresses
To delete a SNMP Manager IP address:
1. Change to Modify mode.
2. Click Install ( ).
3. Click the SNMP IP Security tab.
4. Left-click one or more unwanted IP addresses in the IP Address list box to select them. Right-click to display
the Delete IP Address pop-up command (see Figure 4-4).
5. Select the Delete IP Address command.
6. A confirmation message is displayed. Click OK to request the delete IP address operation(s), or click Cancel
to cancel.
7. If you want to apply the changes to the subsystem, click Apply. Click OK. If you want to cancel the
changes, click Cancel.
Figure 4-4 Delete IP Address Pop-Up Menu