Boonton 9240 RF Voltmeter - Manual (Page 40)

Boonton 9240 Series RF Voltmeter
REPORT Display. The REPORT menu item displays the versions of the firmware and FPGA image installed in the
instrument. The SCPI specification compliance version is also displayed in this report. This display is for informational
purposes only and does not support any editing of the data. The REPORT display is shown in Figure 3-11.
V E R S I O N
F I R M W A R E 2 0 1 0 0 7 1 1
F P G A 1 . 1 8
S C P I 1 9 9 0
Figure 3-11. Report Display
Diagnostics Menu. The Model 9240 can be directed to perform self-tests from the diagnostics menu. The Diagnostics menu is
shown in Figure 3-12 and a description of each command is given in Table 3-6.
R T N
S E L F T E S T <
S W I T C H E S
R E C O R D E R
Figure 3-12. Diagnostics Display
Table 3-6 DIAGNOSTICS MENU Functions
Function Description
Parameters Defaults
RTN
Returns the instrument to the n/a n/a
previous menu.
SELF TEST
Instructs the instrument to n/a n/a
perform internal diagnostics
and the display test.
SWITCHES
Interactive test to verify proper n/a n/a
operation of the front panel
switches.
RECORDER
The recorder output DAC is n/a n/a
exercised through its full range
from 0 to 10 V.D.C. in 1V steps
continuously until the <Menu>
key is depressed.
Getting Started
3-14