Boonton 9240 RF Voltmeter - Manual (Page 85)

Boonton 9240 Series RF Voltmeter
5.5.15 SCPI Command Summary
Table 5-1. SCPI COMMAND SUMMARY
*CLS
Clear Status Command
*ESE
Set/get Standard Event Status Enable
*ESR?
Standard Event Status Register Query
*IDN Identification
Query
*OPC
Operation Complete Command
*OPC?
Operation Complete Query
*OPT?
Return the instrument options
*RST Reset
Command
*SRE
Set/get Service Request Enable
*STB?
Read Status Byte Query
*TRG
Simulate Group Execute Trigger
*TST? Self-Test
Query
ABORt
Immediately set measurement trigger system to idle
CALCulate[1|2]:LIMit:CLEar[:IMMediate]
Clear all latched limit alarms
CALculate[1|2]:LIMit:FAIL?
Return the status of all alarms.
<Boolean> = {summary, LL, UL, LLL, ULL}
CALCulate[1|2]:LIMit:LOWer[:POWer]
Set/return lower limit power level.
< numeric value > = -99.99 to +99.99 dBm
CALCulate[1|2]:LIMit[:BOTH]:STATe Set or return the combined upper and lower limit alarm system
state for the selected channel.
CALCulate[1|2]:LIMit:LOWer:STATe Set/return
lower limit alarms. <Boolean> = 0, 1, OFF, ON
CALCulate[1|2]:LIMit:UPPer:STATe Set/return
upper limit alarms. <Boolean> = 0, 1, OFF, ON
CALCulate[1|2]:LIMit:UPPer[:POWer] Set/return upper limit power level.
< numeric value > = -99.99 to +99.99 dBm
CALCulate:MATH:ARGA
Set or return the first argument to be used for channel math
operations.
Remote Operation
5-35