Figure 7, Surge protector (optional) – Vaisala WMT52 User Manual

Page 23

Advertising
background image

Chapter 2 __________________________________________________________ Product Overview

VAISALA_______________________________________________________________________ 21

0806-001

Figure 7

Surge Protector (optional)

The following surge protectors are available from Vaisala:

-

Vaisala Surge Protector WSP150 is a compact transient
overvoltage suppressor designed for outdoor use. It can be used
with all Vaisala wind and weather instruments. The WSP150
should be installed close to the protected instrument (max 3 m).

-

Vaisala Surge Protector WSP152 is designed to be used with
Vaisala WXT transmitters and WMT sensors, to protect the host
PC against surges entering through the USB port. The WSP152
should be installed close to the PC, no further than the USB cable
can reach (1.4 m).

Vaisala recommends using surge protectors when weather instruments
are installed on top of high buildings or masts and in open grounds, that
is, anywhere with an elevated risk of lightning strike. Also use the surge
protectors if your cable length exceeds 30 m or you have unshielded,
open-wire lines.

Advertising