AMETEK 2120 PLC Interface Module - Manual (Page 2)

i Installation and Programming Manual
1080 North Crooks Road
Clawson, MI 48017-1097
Phone: (248) 435-0700
FAX: (248) 435-8120
Internet: www.ametekapt.com
www.ametek.com
Copyright 1997, 1998, 1999, 2001 by AMETEK
All Rights Reserved - Made in the U.S.A.
Version 0.3
AMETEK has checked the accuracy of this manual at the time it was printed. Any comments you may
have for the improvement of this manual are welcomed.
AMETEK reserves the right to revise and redistribute the entire contents or selected pages of this manual.
All rights to the contents of this manual are reserved by AMETEK.
Preface
This manual is divided into four parts. Part 1 provides an introduction for the Theory and
Operation of the Series 2120 PLC Interface Module. Part 2 contains a Hardware Overview.
Part 3 explains the Mounting and Wiring of the 2120 PLC Interface Module. Part 4 provides
the Programming Instructions. Also included are four Appendixes; Error Messages, Function
Summary Chart, Catalog Numbering System, and Specifi cations. A glossary and index are also
provided at the back of this manual.
Disconnect power before servicing. The Gemco Series 2120 contains no servicable
components other than the power supply fuse. Consult factory for repair or replacement.