Before going to the customer site – Avaya S8300 User Manual
Page 142
Installing a new G700 with an S8300 using the Avaya Installation Wizard
142 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Before Going to the Customer Site
The procedures in this section should be completed before going to the customer site or before
starting a remote installation.
Perform the following pre-installation tasks:
Installing TFTP server (or obtaining USB CD-ROM drive)
Collecting Installation Information
Obtaining service pack files, if needed
If using IA770, obtaining service pack and language files
Completing the RFA process (Obtaining license and password file)
Installing TFTP server (or obtaining USB CD-ROM drive)
Installing Communication Manager on an S8300B requires remastering the S8300B hard drive.
After remastering the drive, the remastering program looks for the Communication Manager
software files on:
●
Your laptop if a TFTP server is installed
or,
●
An external USB CD-ROM drive
You must have the Avaya TFTP server software installed on your laptop or take a USB
CD-ROM drive to the site. If you do not already have the Avaya TFTP server installed on your
laptop, you can obtain the software from the Avaya Support website and install it as described in
Appendix D: Install the Avaya TFTP server
.
!
Important:
Important:
If the new S8300B that you will be installing has Communication Manager
software installed on its hard drive, you must use an external USB CD-ROM drive
instead of the TFTP server on your laptop. See