Avaya S8300 - Manual (Page 357)

Issue 9.1 June 2006 357
Chapter 8: Telephones and adjunct systems
This section provides information on connecting telephones and other adjunct systems. To
install and wire telephones and connect their power supplies, follow the instructions in
● Installation and wiring of telephones and power supplies on page 358
● Complete the telephone installation process on page 383
In addition, you may need to install one or more adjunct systems or devices. Follow the
instructions in:
● IA 770 INTUITY AUDIX messaging application on page 385
● INTUITY AUDIX LX messaging system on page 387
● ASAI co-resident DEFINITY LAN gateway (DLG) on page 387
● Call center on page 389
● Avaya Integrated Management on page 392
● Uninterruptible power supply (UPS) on page 397
● Terminal server installation on page 399
● Call detail recording (CDR) on page 413
● Reliable Data Transport Tool (RDTT) package on page 417
● Printers on page 418
● DS1/T1 CPE loopback jack on page 419
● External modems on page 434
● Busy tone disconnect equipment for non-U.S. installations on page 436
● Music-on-hold on page 437
● Paging and announcement equipment on page 441
● Adjunct Information Sources on page 442
For these adjunct systems, consult the documentation specific to the system for complete
installation instructions.
Your planning documentation specifies the equipment you will be installing.
!
WARNING:
WARNING:
To reduce the risk of fire, use only 26 AWG or larger telecommunication line
cords when installing telephones or adjuncts.