Avaya S8300 User Manual
Page 45
The Installation Wizard
Issue 9.1 June 2006
45
!
CAUTION:
CAUTION:
Be sure that messaging is enabled before you run the IA770 software upgrade
with the Installation Wizard. You can check this with the Maintenance Web
Interface by selecting Messaging Software under Miscellaneous. Messaging is
enabled if you see the Disable button and "Internal Messaging is enabled" at the
end of the note on the screen. The IA770 upgrade will fail if you disable IA770
prior to running the IW for the upgrade.
●
Upgrade firmware on G250, G250-BRI, G250-DS1, G250-DCP, G350, and G700 Media
Gateways and their media modules.
●
Configure alarming strategy.
●
Configure the USB modem on the G250, G250-BRI, G250-DS1, G250-DCP, and G350
Media Gateways, including enabling Access Security Gateway (ASG) or CHAP
authentication.
●
Set Product ID and install unicode files.
●
For the S8300 only, configure telephony and trunking parameters and trunk diagnostics.
You cannot use the Avaya Installation Wizard to do the following:
●
Install a G700 Media Gateway that is not in a stack containing an S8300 Media Server,
acting either as a primary controller or as LSP.
●
Install a G350, G250, G250-BRI, G250-DS1, or G250-DCP Media Gateway that does not
contain an S8300 Media Server, acting either as a primary controller or as an LSP.
●
Install or upgrade an LSP or a G250, G250-BRI, G250-DS1, G250-DCP, G350, or G700
Media Gateway from a remote primary controller.
●
Install a P330 Expansion Module in a G700 or an X330WAN Module
In addition, there are some installation tasks that you must still perform manually following
instructions in Installing and Upgrading the Avaya G700 Media and S8300 Media Server,
555-234-100, Installing and Upgrading the Avaya G350 Media Gateway, 03-300394, or
Installing and Upgrading the Avaya G250 Media Gateway, 03-300434. These are tasks such as
completing the RFA process for acquiring license and authentication files.
Electronic Pre-installation Worksheets and Templates
To speed the installation process, use the following electronic worksheets (as Microsoft Excel
files) with the Installation Wizard:
●
Electronic Preinstallation Worksheet (EPW)
●
Name and Number List (for S8300 only)
●