Avaya S8300 User Manual

Page 574

Advertising
background image

Manual installation of a new G700 without an S8300

574 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

Figure 51: Add Local Survivable Processor screen

2. The type field is automatically populated with LSP. LSP appears in the field if the node

name is not associated with ESS.

3. Enter a network region for the LSP. The default is 1. However, there may be a different

network region better suited for the LSP to provide media gateway and IP phone support.

Skip to

Administering the Media Gateway

on page 584 to continue.

Administering an S8400, S8500, or S8700-series primary
controller

Complete the procedures in this section if the primary controller for the G700 you are installing
is an S8400, S8500, or S8700-series Media Server. If the primary controller is an S8300, you
should have completed the procedures in

Administering an S8300 primary controller

on

page 569.

This document covers only the administration of Communication Manager required for the
G700 media gateway to communicate with the primary controller over a customer’s network.
For the majority of required administration, see Administrator Guide to Avaya Communication
Manager
, 03-300509, or Administration for Network Connectivity for Avaya Communication
Manager
, 555-233-504.

In this section, you will use the SAT interface on the primary controller to:

Assigning Node Names and IP Addresses for the C-LANs and LSPs

Administering Network Regions

Assigning LSPs to the Network Regions

Administering IP Interfaces

Identifying the Survivable Processor on the primary controller

add survivable-processor sv-mg2-lsp

Page 1 of xx

SURVIVABLE PROCESSOR - PROCESSOR ETHERNET

Node Name: sv-mg2-lsp

IP Address: 128.256.173.101

Type: LSP

Network Region: 1

Advertising
This manual is related to the following products: