Using avaya terminal emulator for modem, Connection to communication manager – Avaya S8300 User Manual
Page 69
About connection and login methods
Issue 9.1 June 2006
69
Using Avaya Terminal Emulator for Modem
Connection to Communication Manager
If you have the Terminal Emulator installed on your PC, use the following steps to establish a
modem connection to your Media Server:
To use Avaya Terminal Emulator for Modem Connection to Communication
Manager
1. Complete steps 1–8 in
To use Avaya Terminal Emulator for LAN connection to
2. Click the Modem tab.
The system displays the Modem tab.
3. In the IP address field, type the IP address of the connection’s Dialup Status box as noted
in Step
To use Windows for PPP modem connection (Windows 2000 or XP):
4. In the TCP/IP Port Number field, leave 23 if you want to log in at the Linux command line.
Type 5023 if you want to log in directly to the Communication Manager SAT command line.
5. In the Modem field, use the dragdown box to select the type of modem that your PC uses.
6. In the Serial port field, select the COM port you are using for your modem connection.
7. In the Baud rate field, select 9500 from the dragdown box.
8. Click the Dial Numbers tab.
The system displays the Display Numbers tab.
9. Type the phone number of the media server as appropriate. Enter 1 in the Country Code
field for long-distance.
10. Click OK.
11. On the Connections window, double-click. the name of the connection you just set up.
The PC dials up the media server, and when connected, the login prompt for the
Communication Manager software appears.
12. Log in to Communication Manager to access the SAT command prompt screen. If you are
logging in as craft, you log in to the S8300 Linux software. Then, see