Avaya S8300 - Manual (Page 721)

Before going to the customer site
Issue 9.1 June 2006 721
Before going to the customer site
Perform the following tasks before going to the customer site:
● Planning forms that the project manager provides on page 721
● Setting up the TFTP server on your laptop or on a customer PC, if necessary on page 721
● Downloading G700 firmware files to your TFTP directory on page 722
Planning forms that the project manager provides
The project manager should provide you with forms that contain all the information needed to
prepare for this installation. The information primarily consists of:
● IP addresses
● Subnet mask addresses
● Logins and passwords
● People to contact
● The type of system
● Equipment you need to install
Verify that the information provided by the project manager includes all the information
requested in your planning forms.
Tip:
Tip:
Appendix B: Information checklists , provides several checklists to help you
gather the installation and upgrade information.
Setting up the TFTP server on your laptop or
on a customer PC, if necessary
A tar.gz file, which you obtain from a CD-ROM or a website, contains new G700 firmware. To
install the firmware on a G700, you must place this tar.gz file on a TFTP server that is
connected to the customer’s LAN. The TFTP server can be a customer computer, or it can be
your laptop, if you have arranged with the customer to connect your laptop to the LAN.
Note:
Note:
A Linux or Unix TFTP server should be used only if the customer already has an
existing one. In these cases, you download the tar.gz file to your laptop and give
it to the customer for proper placement and execution.