Avaya S8300 - Manual (Page 95)

About hardware components
Issue 9.1 June 2006 95
Information on installing the G700 using the S8400, S8500 or S8700/S8710/S8720 as the
primary controller can be found in Chapters 4 and 6 in this book.
About endpoint and adjunct components
Additional components and adjunct systems provide sets of tools that allow the customer to
obtain the best possible performance.
Other components and adjunct systems that make up the S8300 Media Server with a G700
Media Gateway include:
● Analog phones and fax machines
● DCP phones
● IP phones
● IP Softphones
● LAN Ethernet switches
● Avaya Integrated Management
● INTUITY AUDIX LX Messaging System
● IA 770 INTUITY AUDIX Messaging Application
● ASAI Co-Resident DEFINITY LAN Gateway (DLG)
● Call Center
● Uninteruptible Power Supply (UPS)
● Universal Serial Bus (USB) Modems
See Chapter 8: Telephones and adjunct systems for more information on installing adjuncts.
About installation planning
In the following sections of this installation guide, you will be guided through the installation of
several configurations. Before the G700 components are physically installed on the customer's
site, several steps will already have been completed to assure that the actual installation will go
smoothly:
● Sales personnel have verified that the product is suited to the customer’s application.
● Planning and implementation personnel have conducted preliminary inspections of the site
and of the other equipment to assure that the S8300/G700 solution will operate at its full
potential.
● A data network readiness assessment has been completed to assure that the solution will
function optimally within the customer's network.