Aalborg SDPROCs User Manual
Page 55
APPENDIX 3
NOTE: Follow Return Procedures In Section a.3.
50
WARRANTY
Aalborg
7 Mass Flow Systems are warranted against parts and workmanship for
a period of one year from the date of purchase. Calibrations are warranted for up
to six months after date of purchase, provided calibration seals have not been
tampered with. It is assumed that equipment selected by the customer is
constructed of materials compatible with gases used. Proper selection is the
responsibility of the customer. It is understood that gases under pressure
present inherent hazards to the user and to equipment, and it is deemed the
responsibility of the customer that only operators with basic knowledge of the
equipment and its limitations are permitted to control and operate the equipment
covered by this warranty. Anything to the contrary will automatically void the
liability of Aalborg
7 and the provisions of this warranty. Defective products will
be repaired or replaced solely at the discretion of Aalborg at no charge. Shipping
charges are borne by the customer. This warranty is void if the equipment is
damaged by accident or misuse, or has been repaired or modified by anyone
other than Aalborg or factory authorized service facility. This warranty defines the
obligation of Aalborg
7 and no other warranties expressed or implied are recognized.