Activeforever Spa2Go STG-1 - Manual (Page 11)

Comfort Line Products
11
ASSEMBLY
1. Unfold the spa liner to lay fl at.
2. Connect the infl ation hose to the blower
exhaust fi tting on the top of the power
pack.
The key lock pin must be inserted into the adapter of the
infl ation hose fi tting when infl ating the spa. Failure to insert the
key lock pin may result in injury.
3. Insert the key lock pin into the infl ation
hose fi tting on the top of the power pack.
4. Plug the power pack into the electric
outlet. Press the Turbo Wave On/Off
button to start the infl ation.
NOTE: The power pack will make a
rattling noise while the pump
is running with no water. This
is normal. Do not run the
power pack without water for
more than 15 minutes.
5. Infl ate the three spa side tubes and the
spa interior fl oor.
NOTE: Do not over infl ate the lower
tube. Over infl ation may cause
lack of air fl ow and water
action.
Key Lock
Pin