Activeforever Spa2Go STG-1 - Manual (Page 15)

Comfort Line Products
15
Plug the spa into a properly grounded electrical outlet.
5. Plug the power pack into the electrical outlet. Th e water pump will turn
on and begin pumping water. Water should fl ow from the small return
nozzle on the bottom inside wall of the spa behind the power pack.
If water is not fl owing from the return nozzle, repeat the air bleeding
instructions provided in step 4. Unplug the power pack while bleeding
air.
NOTE: If the air is not properly bled from the fi lter tank, the water
pump will be air bound and no water will fl ow. This will
prevent the spa from heating, and the water will not be
fi ltered. Make sure water is fl owing from the return nozzle
before continuing.
6. Place the infl atable bladder cover on the
spa. Make sure the cover is centered on
the spa.
Always supervise children around bodies of water. The spa
cover is not a safety cover. The spa cover is not a substitute for
adult supervision.
7. Place the top cover over the spa and line
up the eight cover locks.