Getting started – Samsung HT-C9950W-XAA User Manual
Page 18
18
English
Getting Started
Rear Panel of the Subwoofer
1
COOLING FAN
The cooling fan supplies cool air to the subwoofer to prevent overheating and
always revolves when the power is on.
2
TX CARD CONNECTION
(WIRELESS)
Insert the TX card here to enable communication between the product and
the wireless receiver module.
3
USB PORT
(ONLY USE FOR AMP UPDATE)
Accessible by trained service personnel for Amp software upgrades only.
(ONLY USE FOR AMP UPDATE)
4
SYSTEM CABLE JACK
Connect the system cable here and to the system cable jack on the main
unit.
5
HDMI OUT JACK
Using an HDMI cable, connect this HDMI output terminal to the HDMI input
terminal on your TV for the best quality picture.
6
HDMI IN JACKS
Connect this HDMI Input jack to the HDMI output of a Blu-ray player or similar
device that outputs a digital video and audio signal using an HDMI cable.
7
FM ANT JACK
Connect the FM antenna.
8
ASC IN JACK
Connect the ASC Microphone here for MRC (Musical Room Calibration).
9
AUX IN JACKS
Connect the 2CH analog audio output of an external device, such as a VCR,
here.
10
OPTICAL JACK
Using a digital optical cable, connect external equipment capable of digital
audio output here.
11
LAN TERMINAL
Connect a LAN cable from a router here for access to network based
services, BD-LIVE, and software upgrades from the Internet.
12
SPEAKER OUTPUT
CONNECTORS
Connect the front, center, surround back speakers.
CAUTION
Ensure a minimum of 4 inches of clear space on all sides of the cooling fan when installing the product.
Do not obstruct the cooling fan or ventilation holes.
!
2
4
5
12
6
3
10
11
9
8
7
1
HT-C9950W_XAA_0820.indd 18
HT-C9950W_XAA_0820.indd 18
2010-08-20 3:45:59
2010-08-20 3:45:59