Samsung HT-C9950W-XAA - Manual (Page 65)

English
65
04
Basic Functions
Listening to Radio
Using buttons on the Remote Control
Press the FUNCTION button to select TUNER.
Tune in to the desired station.
Automatic Tuning 1 : When you press the #
$ button, you select a preset broadcast station.
Automatic Tuning 2 : Press and hold the
TUNING/CH (
) button to automatically
search for active broadcasting stations.
Manual Tuning : Press the TUNING/CH
(
) button to increase or decrease the
frequency incrementally.
Setting Mono/Stereo
Press the MO/ST button.
Each time you press the button, the
sound switches between STEREO
and MONO.
In a poor reception area, select
MONO for a clear, interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 into memory
Press the FUNCTION button to select TUNER.
Press the TUNING/CH (
) button to select
<89.10>.
Press the TUNER MEMORY button.
NUMBER fl ashes on the display.
Press the # $ button to select
a preset number.
You can select between 1 and 15
presets.
Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before
NUMBER disappears from the display.
NUMBER disappears from the display and
the station is stored in memory.
To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the # $
button on the remote control to select a channel.
1.
2.
•
•
•
•
•
1.
2.
3.
•
4.
•
5.
•
•
6.
•
Use iPod/iPhone with a Wireless Dock
Cradle for iPod/iPhone
You can enjoy fi ner quality music through the
speakers by transmitting an iPod/iPhone’s audio
signal using a Wireless Transmitter.
The Wireless Transmitter's linking ID is preset at
the factory and the main unit and Wireless
Transmitter should link (connect wirelessly)
automatically when the main unit is turned on. If
the link indicator does not light when you turn on
the main unit and Wireless Transmitter, you must
set the ID manually. (See page 66)
Turn on the main unit and connect the iPod/
iPhone to the Wireless transmitter.
Then, press the FUNC. button on the product to
select "iPod" mode.
The FUNC. mode of the main unit switches as
follows: BD/DVD
 D.IN  AUX  iPod 
HDMI 1
 HDMI 2  TUNER ( See page 16)
How to charge the Wireless Transmitter
STAN DBY
LINK
CHARGE
CH ARG
E
STANDB
Y
Connect the Wireless Transmitter to the
Charging Cradle.
Connect the DC power adaptor to a wall
socket.
The charging indicator lights and charging
starts. After the battery is fully charged, the
charging indicator turns Green.
Operation status of the charging cradle's LED
Display Function
GREEN LED ON
Power on /Charging
completed
RED LED ON Charging.
1.
2.
•
HT-C9950W_XAA_0820.indd 65 HT-C9950W_XAA_0820.indd 65 2010-08-20 3:47:31 2010-08-20 3:47:31