Samsung HT-C9950W-XAA - Manual (Page 54)

54
English
Setup
Support
Software Upgrade
This menu allows you to upgrade software for
performance improvements or additional services.
You can check the current software version,
upgrade using the Internet, and set the Auto
upgrade notifi cation. If the product is properly
connected to the network by cable or wirelessly,
the product automatically connects to our website
each time it is turned on and downloads update
fi les if any valid upgrade exists.
Display
Audio
System
Network
Language
Security
General
Support
Settings
Software Upgrade
Disc Menu :
Audio :
Subtitle :
Software Upgrade
Current Version : XXX-XXXXXXXXX
By Internet |
Auto Upgrade Notifi cation : On
> Move s Select r Return
To select By Internet, press the ENTER
button.
A popup message will appear if an update is
available, asking if you want to upgrade.
If you select Yes, the product turns off
automatically, restarts, and then begins the.
upgrade. (Never turn it on manually here.)
The update progress popup appears.
When the update is complete, the product
turns off again automatically.
Press the POWER button to turn on the
product.
NOTE
The Update is complete when the product turns
off after restarting. Press the POWER button to
turn on the updated product for your use. Never
turn the product off or on manually during the
update process.
Samsung Electronics shall take no legal
responsibility for product malfunction caused an
unstable internet connection or consumer
negligence during software upgrade.
1.
2.
3.
4.
✎


You can also update software in two other ways:
USB : Visit www.samsung.com/support, and
then download and store the latest software
(RUF fi le) onto a USB fl ash drive. Make sure the
disc tray is empty, connect the USB fl ash drive
to the USB port of the product, and then follow
the on-screen instructions to update the
software.
CD : Visit www.samsung.com/support, and
then download and write the latest software
(RUF fi le) onto a disc. Insert and play the disc in
the product to start the update, and then follow
the on-screen instructions.
NOTE
Before you upgrade the software using the
USB port, make sure there is no disc in the
product.
If you want to cancel the upgrade while the
upgrade fi les are downloading, press the
ENTER button.
When the software upgrade is done, check the
software details in the software Upgrade
menu.
Do not turn off the product during the software
upgrade. It may cause the product to
malfunction.
Use only USB fl ash drives when upgrading the
software through the USB Host jack. Other
kinds of USB devices will not work.
Contact Samsung
Provide contact information for assistance with
your product.
•
•
✎





HT-C9950W_XAA_0820.indd 54 HT-C9950W_XAA_0820.indd 54 2010-08-20 3:47:08 2010-08-20 3:47:08