Samsung HT-C9950W-XAA - Manual (Page 42)

42
English
Setup
Resolution according to the output mode
Blu-ray Disc playback
Output
Setup
HDMI
Auto Optimal Resolution
1080p, Movie Frame (24Fs) off 1080p@60F
1080p/1080i,
Movie Frame (24Fs) on
1080p@24F
1080i, Movie Frame (24Fs) off 1080i
720p 720p
480p 480p
DVD playback
Output
Setup
HDMI
Auto Optimal Resolution
1080p 1080p@60F
1080i 1080i
720p 720p
480p 480p
•
•
NOTE
If the connected TV does not support Movie
Frame or the selected resolution, the message
“If no pictures are shown after the selection,
please wait for 15 seconds. And then, the
resolution will be reverted to the previous value
automatically. Would you like to make a
selection?” appears.
If you select Yes and the resolution is not
supported, the TV's screen will be blank.
Please wait for 15 seconds and the resolution
will be reverted to the previous value
automatically.
If the screen is blank, press and hold the
STOP () button on the front of the product
for more than 5 seconds (no disc inserted).
All settings are restored to the factory default.
Follow the steps on the previous pages to
access each mode and select the Display
Setup that your TV will support.
When the factory default settings are restored,
all user BD data is deleted.
✎



The Blu-ray Disc must have the 24 frame
feature to use the Movie Frame (24Fs) mode.
If the HDMI Auto Detection feature does not
work, you can't select the 1080p resolution or
Movie Frame (24Fs).


HT-C9950W_XAA_0820.indd 42 HT-C9950W_XAA_0820.indd 42 2010-08-20 3:46:52 2010-08-20 3:46:52