Samsung HT-C9950W-XAA - Manual (Page 21)

English
21
01
Getting Started
Fit the rear round side of the product into the
stand holes and fi x it with 4 small black screws
(4x12).
- Ensure that you insert it in the right direction. 1.
2
Installation
You can install the Control Unit in three ways: On a table stand, on a Tallboy type of stand, or on the wall.
Choose the installation method that fi ts your installation area and decorating plan, and then follow the
appropriate directions below.
Installing on the Table Stand
Diagram 2 shows the product installed properly
on the table stand. 2.
Installing on a Tallboy Type of Stand
If you want to place the Control Unit vertically on the fl oor, use a Tallboy type of stand with a stand base and
pole. Proceed with the installation considering the size, installation area, and position of the Tallboy stand.
Turn the stand base over so the black side
(bottom) faces you.
- The top is silver. The bottom is black 1.
1
1
HT-C9950W_XAA_0820.indd 21 HT-C9950W_XAA_0820.indd 21 2010-08-20 3:46:01 2010-08-20 3:46:01