Samsung HT-C9950W-XAA - Manual (Page 70)

70
English
Network Services
Starting Internet@TV for the First Time
To start up Internet@TV for the fi rst time, follow
these steps:
Access Internet@TV as described on the
previous page. The Internet@TV screen
appears. In most cases, immediately after,
the Country screen appears.
If the Country screen has appeared, use the
▲▼◄►buttons to select your country.
When done, press Enter.
NOTE
Certain applications are available only in certain
countries.
The General Disclaimer screen appears. Use
the ◄► buttons to move to Agree, and then
press Enter.
NOTE
Screens can take a few seconds to appear.
The Internet Privacy Policy screen appears.
Use the ◄► buttons to move to Agree, and
then press Enter.
The Service Update screen appears and
installs a number of services and
applications. When done, it closes. The
applications and services downloaded are
listed on the Internet@TV screen.
NOTE
Internet@TV may close momentarily during the
installation process.
A number of screens appear after installation.
You can press Enter to close them or let them
close on their own.
To start an application, use the ▲▼◄►
buttons to highlight the application, and then
press Enter. The application starts.
Account Login
For a more enjoyable application experience,
register and log in to your account.
To do this, you must create an account fi rst.
(For instructions on creating an account, refer to
Internet@TV ID on page 71.)
Press the ▲▼◄► buttons to select the
desired application and press the RED (A)
button.
1.
2.
✎
▪
3.
✎
▪
4.
5.
✎
▪
▪
6.
1.
Enter your user account and password.
Settings
Create IDs and confi gure Internet@TV settings
on this screen. To accesss the Settings screen,
click the Settings button on lower left of the main
Internet@TV screen.
System Setup
Change the Service Lock password
The Service Lock password function lets you set
a password that you can then use to establish
password controlled access to Internet@TV
services such as Netfl ix and Blockbuster. After you
have set the password, you then set a service to
locked or unlocked on the Service Manager screen.
When a service is locked, you must enter the
Service Lock password to access it.
To use the Service Lock function, follow these
steps:
Highlight Change the Service Lock password
on the Settngs screen, and then press Enter.
On the screen that appears, enter the current
password. If this is the fi rst time you are
using the Service Lock function, enter the
default password, 0-0-0-0, using your
remote. The next screen appears.
2.
1.
2.
 System setup
 Internet@TV ID
 Service Manager
 Properties
Settings
Change the Service Lock password
Reset
' Cancel
HT-C9950W_XAA_0820.indd 70 HT-C9950W_XAA_0820.indd 70 2010-08-20 3:47:43 2010-08-20 3:47:43