Samsung HT-C9950W-XAA - Manual (Page 62)

62
English
Basic Functions
Sound Mode
DSP (Digital Signal Processor) Function
This will regulate and stabilize the volume level
against a drastic volume change when changing
channels or during a scene transition.
Press the DSP button.
SMART SOUND
¨ MP3 ENHANCE ¨
POWER BASS
¨ DSP OFF
• SMART SOUND : This will regulate and
stabilize the volume level against a drastic
volume change when changing channels or
during a scene transition.
• MP3 ENHANCE : This also helps enhance
your sound experience (ex. mp3 music). You
can upscale your MP3 level sound (24 kHz,
8bit) to CD level sound (44.1 kHz, 16bit).
• POWER BASS : This function enhances low
tones providing thudding sound effects.
SFE (Sound Field Effect) MODE
You can set the SFE mode best suited for the
type of music you are listening to.
Press the SFE MODE button.
HALL1
Provides a clear vocal as if
listening in a concert hall.
HALL2
Also provides a clear vocal as if
listening in a concert hall, but less
powerful than HALL1.
JAZZ Recommended setting for Jazz.
CHURCH
Gives the feel of being in a grand
church.
ROCK Recommended setting for Rock.
SFE OFF Select this for normal listening.
Dolby Pro Logic
II Mode
You can select the desired Dolby Pro
Logic
II audio mode.
Press the PL
II button.
Setting the speakers to DPL IIz
Set the DPL IIz speaker setting to “On”.
(For further details, refer to page 44.)
- Press the
PL II button on the
remote control until "DPL IIz” or “DPL IIz
OFF” appears on the display. Set to
“DPL IIz” to enable sound reproduction
from front left and righ wall speakers
(See page 27.)
DPLIIz
You can listen to a 2CH sound source in 7.1CH
surround sound with all speakers active.
- A specifi c speaker(s) may not be output
depending on the input signal.
DPLIIz
OFF
Select this option to listen through the front left/
right speakers and the subwoofer only.
Setting the speakers to DPL IIx
Set the DPL IIz speaker setting to “Off”.
(For further details, refer to pages 44.)
- Press the
PL II button on the remote
control until the desired setting is
displayed. Once you have selected the
desired mode, you will hear sound through
the rear speakers. (See page 27.)
MUSIC
When listening to music, you can experience
sound effects as if you are listening to the
actual performance.
MOVIE Adds realism to the movie soundtrack.
PROLOG
You can listen to a 2CH sound source in 7.1CH
surround sound with all speakers active.
- A specifi c speaker(s) may not be output
depending on the input signal.
MATRIX You will hear multi channel surround sound.
STEREO
Select this to listen to sound from the front left
and right speakers and the subwoofer only.
1.
1.
HT-C9950W_XAA_0820.indd 62 HT-C9950W_XAA_0820.indd 62 2010-08-20 3:47:23 2010-08-20 3:47:23