ADC Campus-REX RS Interface Card - Manual (Page 73)

Configuring and Monitoring through the LCD
Campus-REX RS Interface Card User Manual 4-13
To view the system information:
1 Press Escape until CAMPUS RS I/F: REX displays.
2 Press Enter to view the firmware version and PROM checksum.
3 Press Next to scroll through the remaining options.
V IEWING S TATUS I NFORMATION
The LCD provides access to the following status information:
• Ethernet information, such as the MAC address and 10BASE-T status
• Current HDSL margin
• Frame statistics on the Ethernet and HDSL ports
Ethernet Information
You can view the following information about the Ethernet port:
• MAC address
• current 10BASE-T status
To view Ethernet information:
1 Press Escape until CAMPUS RS I/F: REX displays.
2 Press Next twice. DATA PORT CONFIG & STATUS displays.
3 Press Enter. CONFIGURE REX SETTINGS displays.
4 Press Next to view the MAC ADDRESS .
5 Press Next again to view the current status of the 10BASE-T port.
CAD1069i5.book Page 13 Thursday, May 30, 2002 7:32 AM