ADC Campus-REX RS Interface Card User Manual
Page 92
Configuring with an ASCII Terminal
5-16
Campus-REX RS Interface Card User Manual
3
To configure the HDSL ES Alarm Threshold, type
then press
.
The System Parameters menu shows the new HDSL ES Alarm
Threshold setting. Repeat this step until the desired setting displays.
4
To configure the HDSL Margin Alarm Threshold, type
then press
.
5
Type the desired margin threshold value, or
to disable, then press
. The System Parameters menu shows the new HDSL Margin
Threshold setting. Repeat this step until the desired setting displays.
6
To enable or disable the AutoSync alarm, type
then press
. The
System Parameters menu shows the new AutoSync alarm setting. Repeat
this step until the desired setting displays.
7
To enable or disable the local LOS alarm, type
then press
. The
System Parameters menu shows the new Alarm on Local I/F LOS
setting. Repeat this step until the desired setting displays.
8
To enable or disable the remote LOS alarm, type
then press
. The System Parameters menu shows the new Alarm on Remote
I/F LOS setting. Repeat this step until the desired setting displays.
May 3, 1999
ADC DSL SYSTEMS INC., CAMPUS RS, Version x.xx
13:18:50
Local Unit ID:
Campus-REX Unit #34
Local I/F:
REX
Remote Unit ID: Campus-REX Unit #12
Remote I/F: REX
Circuit ID:
Network Extension Circuit 5001
SYSTEM PARAMETERS
1) Change System Time
2) Change System Date
3) Change Unit ID
4) Change Circuit ID
5) Change Password
6) HDSL ES Alarm Threshold:
Disabled
(Disabled, 17, 170)
7) HDSL Margin Alarm Threshold:
Disabled
8) Autosync Configuration Alarm: Enabled
(Enabled, Disabled)
9) Local Data Port LOS Alarm:
Disabled
(Disabled, Enabled)
10) Remote Data Port LOS Alarm:
Disabled
(Disabled, Enabled)
11) RESET TO FACTORY DEFAULT
(R)eturn
(M)ain Menu
ENTER CHOICE>
6
ENTER
7
ENTER
D
ENTER
8
ENTER
9
ENTER
1 0
ENTER
CAD1069i5.book Page 16 Thursday, May 30, 2002 7:32 AM