Rmc 7189 – Acnodes RACKMOUNT SYSTEM RMC 7189 User Manual
Page 10
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7189
1U Rackmount System
1-2
Serverboard Features
At the heart of the Acnodes RMC7189 lies the embedded system, a dual processor serverboard
based on the Intel® IOH-36D + ICH10R chipset. Below are the main features of the embedded system
(See Figure 1-1 for a block diagram of the chipset).
Processor
The RMC7189 supports single or dual two Intel® 5500 Series processors in LGA1366 sockets.
Please refer to our web site for a complete listing of supported processors
Memory
The RMC7189 has 240-pin DIMM sockets that can support up to 96 GB of regis- tered ECC DDR3-
1333/1066/800 SDRAM. Please refer to Chapter 5 for installing memory.
UIO
The RMC7189 is a specially-designed serverboard that features Acnodes's UIO (Universal I/O) tech-
nology. UIO serverboards have a PCI Express x8 slot that can support any one of several types of UIO
card types to add SAS ports, additional LAN ports, etc. to the serverboard. This allows the user to
tailor the serverboard to their own needs.
Note: the server does not come with a UIO card installed.
Onboard SATA
An on-chip (ICH10R) SATA controller is integrated into the RMC7189 to provide a six-port, 3 Gb/sec
SATA subsystem, which is RAID 0, 1, 5 and 10 supported. The SATA drives are hot-swappable units.
Note: You must have RAID set up to enable the hot-swap capability of the SATA drives. Documentation
on RAID setup guidelines can be found on our web site.
Onboard Controllers/Ports
An onboard IDE controller supports one floppy drive. Onboard I/O backpanel ports include one COM
port, a VGA port, two USB ports, PS/2 mouse and keyboard ports and two Gigabit LAN (NIC) ports.
Graphics Controller
The RMC7189 features an integrated Matrox G200eW graphics chip, which includes 8 MB of DDR2
memory.