Acnodes RACKMOUNT SYSTEM RMC 7189 - Manual (Page 46)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7189
1U Rackmount System
HDD LED
The HDD (IDE Hard Disk Drive) LED
connection is located on pins 13 and
14 of JF1. Attach the IDE hard drive LED cable to
display disk activity. Refer to the table on the right
for pin definitions.
NIC2 LED
The NIC2 (Network Interface Control- ler) LED
connection is located on pins 9 and 10 of JF1.
Attach the NIC2 LED cable to display network
activity. Refer to the table on the right for pin
definitions.
NIC1 LED
The NIC1 (Network Interface Control- ler) LED
connection is located on pins 11 and 12 of JF1.
Attach the NIC1LED cable to display network
activity. Refer to the table on the right for pin defini-
tions.
Overheat (OH)/Fan Fail/PWR Fail/ UID LED
Connect an LED to pins 7 and 8 of JF1 to provide
advanced warning of chassis overheating or fan
failure. These pins also work with the front UID
indicator, which will activate as either a solid or
flashing blue LED depending on whether the LED
was activated via IPMI or the UID button. Refer to
the tables on the right for pin definitions and status
indicators.