Acnodes RACKMOUNT SYSTEM RMC 7189 - Manual (Page 83)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7189
1U Rackmount System
Acnodes has leveraged this feature by assigning a temperature status to certain thermal conditions
in the processor (Low, Medium and High). This makes it easier for the user to understand the CPU's
temperature status, rather than by just simply seeing a temperature reading (i.e., 25oC). The CPU
Temperature feature will display the CPU temperature status as detected by the BIOS:
Low - This level is considered as the 'normal' operating state. The CPU temperature is well below
the CPU 'Temperature Tolerance'. The serverboard fans and CPU will run normally as configured in
the BIOS (Fan Speed Control).
Medium - The processor is running warmer. This is a 'precautionary' level and generally means that
there may be factors contributing to this condition, but the CPU is still within its normal operating
state and below the CPU 'Temperature Tolerance'. The motherboard fans and CPU will run normally
as configured in the BIOS. The fans may adjust to a faster speed depending on the Fan Speed
Control settings.
User intervention: No action is required. However, consider checking the CPU
fans and the chassis ventilation for blockage.
High - The processor is running hot. This is a 'caution' level since the CPU's 'Tem- perature Toler-
ance' has been reached (or has been exceeded) and may activate an overheat alarm.
User intervention: If the system buzzer and Overheat LED has activated, take action immediately by
checking the system fans, chassis ventilation and room temperature to correct any problems. Note:
the system may shut down if it con- tinues for a long period to prevent damage to the CPU.
Notes:
1. The system may shut down if it continues for a long period to prevent damage to the CPU.
2. The information provided above is for your reference only. For more information on thermal man-
agement, please refer to Intel's Web site at www.Intel.com.
System Temperature: The system temperature will be displayed (in degrees in Celsius and Fahr-
enheit) as it is detected by the BIOS.
Fan1 ~ Fan 8 Reading
This feature displays the fan speed readings from fan interfaces Fan 1 through Fan 8.