Rmc 7189, 6 adding pci cards – Acnodes RACKMOUNT SYSTEM RMC 7189 User Manual
Page 42
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7189
1U Rackmount System
5-6
Adding PCI Cards
PCI Expansion Slots
Riser cards are used to support add-on cards to the system. See the tables below for the expansion
cards that may be used in the serverboard chassis.
PCI Card Installation
Before installing a PCI add-on card, make sure you install it into the correct riser card. Begin by
releasing the locking tab that corresponds to the slot you wish to populate. Insert the expansion card
into the correct riser card, pushing down with your thumbs evenly on both sides of the card.