Rmc 7189 – Acnodes RACKMOUNT SYSTEM RMC 7189 User Manual
Page 53
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7189
1U Rackmount System
BMC/PHY Reset
Jumper JPRST1 allow the user to reset the
Winbond WPCM450 BMC (Base- board Manage-
ment Controller) chip and the PHY chip. The default
is set to Open for normal operation. See the table
on the right for jumper settings.
ME Mode Select
Closing jumper JP3 allows the user to bypass the
SPI flash security and allow the manufacturer to
flash the BIOS on the production line. See the table
on the right for jumper settings.
ME Recovery
Jumper JP5 allows the user to select the ME Firm-
ware Recovery Mode for BIOS or firmware recov-
ery. When in this mode, only essential system func-
tions will be supported. This mode can- not be used
for online BIOS upgrades. See the table on the right
for jumper settings.