Acnodes RACKMOUNT SYSTEM RMC 7189 - Manual (Page 11)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7189
1U Rackmount System
Other Features
Other onboard features that promote system health include voltage monitors, a chassis intrusion
header, auto-switching voltage regulators, chassis and CPU overheat sensors, virus protection
and BIOS rescue.
1-3 Server Chassis Features
The RMC7189 features eight 2.5" hard drive bays and high-efficiency power supplies. The
RMC7189 is built upon the embedded system chassis while the RMC7189 is built upon the embed-
ded system chassis. Details on the chassis and on servicing procedures can be found in Chapter
6.The following is a general outline of the main features of both chassis.
System Power
The RMC7189 features a redundant 650W power supply consisting of two power modules. The
system does not need to be shut down when replacing or removing a single power supply module.
The RMC7189 features a single 560W power supply module. The system must be shut down when
replacing or removing this power supply module.
PCI Expansion Slots
A riser card on the right side of the chassis can sup- port AOC-PG-i2+ add-on card to provide two
Gb LAN ports. The left side supports a UIO card and one PCI-E x16 card. These two systems can
support four SAS/ SATA drives with an optional UIO SAS card.
See page 5-10 for details. (Right and left refer to the side when viewed from the front of the system.
Control Panel
The SC113 control panel provides important system monitoring and control informa- tion. LEDs
indicate power on, network activity, hard disk drive activity and a UID (Universal Information) LED.
Also present are a main power button, a system reset button and a UID button.
I/O Backplane
The RMC7189 is a 1U rackmount chassis. Its I/O backplane provides three standard size PCI slots,
one COM port, one VGA port, two USB ports, PS/2 mouse and keyboard ports, two Ethernet (LAN)
ports, one dedicated IPMI LAN port and a UID LED.