AMT Datasouth documax 3300 - Manual (Page 188)

User’s Guide
G-6 Escape Sequence Quick Reference
IBM Proprinter (Cont’d)
ASCII
Command
IBM Proprinter
Command Description
ESC 5 Select/Cancel automatic line feed.
ESC 6 Select character set 2.
ESC 7 Select character set 1.
ESC 8 Disable paper out detector.
ESC 9 Enable paper out detector.
ESC : Select 12 characters per inch.
ESC < Enable one line unidirectional printing.
ESC = Start downloading characters.
ESC A Set line spacing to n/72 inch.
ESC B Set vertical tabs.
ESC C Set forms length in lines.
ESC C Set forms length in inches when first variable is a null.
ESC D Set horizontal tab.
ESC E Select emphasized printing.
ESC F Cancel emphasized printing.
ESC G Select double-strike printing.
ESC H Cancel double-strike printing.
ESC I Enable/disable printing of characters stored in the lower control
code area (00hex to 31 hex).
ESC J Perform an immediate line feed of n/216 inch.
ESC K Select normal-density graphics.
ESC L Select double-density graphics (half speed).