AMT Datasouth documax 3300 - Manual (Page 47)

User’s Guide
Forms Handling 3-1
3. Forms Handling
3.1 Recommended Types and Sizes
The following are guidelines for recommended paper types and sizes for use with the printer.
Continuous Forms (Main Paper Path)
Width – 3 ½ to 10 5/8 inches (88.9mm to 269.8 mm)
Individual Part Thickness - .005 inch maximum (.127mm)
Total Form Thickness - .028 inch maximum (.711mm)
Number of copies – 1 original plus 8 copies
Maximum Printable Width – 8.8 inches (223 mm)
Continuous Forms (Alternate Paper Path)
Width – 3 to 10 ½ inches (76.2 mm to 266 mm)
Individual Part Thickness - .005 inch maximum (.127 mm)
Total Form Thickness - .028 inch maximum (.711 mm)
Number of copies – 1 original plus 8 copies
Maximum Printable Width – 8.8 inches (223 mm)
Cut Sheet Forms (Cut Sheet Path)
Width – 2 ¾ to 10 5/8 inches (69.9 mm to 269.8 mm)
Individual Part Thickness - .005 inch maximum (.127 mm)
Total Form Thickness - .028 inch maximum (.711 mm)
Number of copies – 1 original plus 8 copies
Maximum Printable Width – 8.8 inches (223 mm)
Minimum Form Length – 4.25 inches (110 mm)
Minimum Form Weight – 20 lb. Bond (75 g/m
2
)