AMT Datasouth documax 3300 - Manual (Page 83)

User’s Guide
Features and Profiles 4-7
4.5 Profile Feature Listing
To print a listing of the feature settings of a particular profile, follow the steps below:
1. Make certain 20 column or wider paper is loaded in the printer.
2. Press the On/Off Line key to take the printer off line.
3. Before entering Setup Mode, press the Profile key until it displays the profile you wish
to print.
4. Open the Keypad Door and use the Next Menu key to go to Menu 9. The display will
read:
5. Press the Feature ▼ key until display reads:
6. Press the Enter key. The printer will print a listing of the profile feature settings.
7. Close the Keypad Door to exit Setup Mode after printout is complete.
8. Press the On/Off Line key to return to normal operation.
M9 DIAGNOSTICS
Print Profile