AMT Datasouth documax 3300 - Manual (Page 61)

User’s Guide
Forms Handling 3-15
3.5 Tear Off Adjustment
In a demand document application, the form will be advanced to a tear off position when the
Tear Off key is pressed. When the forms are in this position, the last printed form may be
removed by pulling the perforation against the tear edge of the cover.
If the perforation does not come to rest at the tear edge, the tear off distance may be adjusted
as follows:
1. Press the Tear Off key. The form should move up to the current tear location.
2. Using the Adjust ▲ key or the Adjust ▼ key, move the paper until the perforation is
located at the desired tear off position.
3. Press the Tear Off key. The form will return to the current print position.
4. This adjustment affects the Tear Distance feature and is automatically saved in
memory for the current profile and will be applied when forms are reloaded.
NOTE
By adjusting the tear distance to a large
value, the form can be fed through a
countertop, for example, if the printer is
located under a counter.