AMT Datasouth documax 3300 - Manual (Page 70)

User’s Guide
3-24 Forms Handling
3.9 Changing From Alternate Paper Path to Main
Paper Path
If paper is loaded in the alternate printer path, you may change to the Main Paper Path by
proceeding as follows:
1. Press the On/Off Line key to take printer off line.
2. Press the Tear Off key to advance form to tear off point. Remove last printed form.
3. Press the Park key. The continuous forms will be backed down out of the paper path
and held in the tractors. The display will appear as shown:
4. Press the Path key. The printer will shift to the Main Paper Path and automatically
load paper. If paper is not loaded in the main path, the display will indicate so.
5. If paper is loaded, press On/Off Line key.
<Paper Out: Alt>
<Paper Out: Main>
NOTE
To use the Path key, the ‘Path’ feature setting
must be set to ‘Either’ in the current selected
Profile. If the ‘Path’ feature is set to ‘Main’
or ‘Alt’, the Path key is disabled. See
Sections 3.12 – 3.13 for a description of paper
path changing using Profiles.