Features and profiles, 1 features – AMT Datasouth documax 3300 User Manual
Page 77
User’s Guide
Features and Profiles 4-1
4. Features and Profiles
4.1 Features
This chapter describes and explains the various user programmable features of the printer.
Using the keypad, the printer can be easily configured to operate in a variety of host
environments and provide print for common applications such as reports, checks, invoices,
and labels.
The printer’s features are grouped into the following 10 categories:
Menu Name
Feature Examples
M1 PAGE FORMAT
Line/Inch, Form Length, Margins, etc.
M2 FORMS CONTROL
Load Dst, Horz Adj., etc.
M3 PERSONALITY
Emulations , Fonts, Character Sets, etc.
M4 PRINTER CONTROL
Auto LF, Auto CR, etc.
M5 SERIAL CONTROL
Baud Rate, Parity, Handshaking, etc.
M6 PARALLEL CONTROL
Handshaking, Ack After Busy, etc.
M7 PROFILE CONTROL
Naming, Saving Profiles, etc.
M8 FORM THICKNESS
Auto Form Gap, Retract Printhead, adjust Form Gap, etc.
M9 DIAGNOSTICS
Print Profile , Print Test, Firmware Rev., etc.
M10 SYSTEM CONTROL
Off Line, Reset Key Lock, Quick Access, etc.
See Pages 4-11 through 4-26 for a detailed listing and description of all features and values.
NOTE
System Control Group must be activated for
access. See Appendix D.