Allied Telesis AT-FS970M Series - Manual (Page 1150)

Chapter 72: SNMPv1 and SNMPv2c Commands
1150
SNMP-SERVER ENABLE TRAP
Syntax
snmp-server enable trap
Parameters
None
Mode
Global Configuration mode
Description
Use this command to activate the transmission of all SNMP traps, except
for power-inline, link status, and authentication traps, which are activated
separately.
Confirmation Command
“SHOW RUNNING-CONFIG SNMP” on page 1143
Example
This example activates the transmission of all SNMP traps, except for
power-inline, link status, and authentication traps:
awplus> enable
awplus# configure terminal
awplus(config)# snmp-server enable trap