Allied Telesis AT-FS970M Series - Manual (Page 1164)

Chapter 73: SNMPv3 Commands
1164
NO SNMP-SERVER USER
Syntax
no snmp-server user user
Parameters
user
Specifies the name of a user you want to delete from the switch.
The name is case sensitive.
Mode
Global Configuration mode
Description
Use this command to delete SNMPv3 users. You can delete just one user
at a time with this command.
Confirmation Command
“SHOW SNMP-SERVER USER” on page 1169
Example
This example deletes the SNMPv3 user “tedwards”:
awplus> enable
awplus# configure terminal
awplus(config)# no snmp-server user tedwards