Allied Telesis AT-FS970M Series - Manual (Page 1442)

Chapter 92: Secure HTTPS Web Browser Server
1442
Displaying the Web Browser Server
To display whether the HTTPS web server is enabled or disabled on the
switch, issue the SHOW IP HTTPS command in the Privileged Exec
mode. The command also displays the protocol port number if the server
is enabled. Here is the command:
awplus> enable
awplus# show ip https
Here is an example of the display.
Figure 239. SHOW IP HTTPS Command
The fields are described in Table 152 on page 1455.
HTTPS server enabled. Port: 443
Certificate 1 is active
Issued by: self-signed
Valid from: 5/17/2010 to 5/16/2011
Subject: C=US, ST=California, L=San_Jose, O=ABC_Inc, OU=Production,
CN=169.254.143.1
Finger print: 5C7D34A9 5283B3C 87901271 6C66D2F5