Allied Telesis AT-FS970M Series - Manual (Page 1475)

AT-FS970M Switch Command Line User’s Guide
1475
AAA ACCOUNTING LOGIN
Syntax
aaa accounting login default start-stop|stop-only|none group
radius|tacacs
Parameters
default
Indicates the default accounting method list.
start-stop
Sends a start accounting message at the beginning of a session
and a stop accounting message at the end of the session.
stop-only
Sends a stop accounting message at the end of the session.
none
Disables accounting messages.
group
Indicates the user server group. Specify one of the following:
radius: Uses all RADIUS servers.
tacacs: Uses all TACACS+ servers.
Mode
Global Configuration mode
Description
This command configures RADIUS or TACACS+ accounting for all login
shell sessions. This command creates a default method list that is applied
to every console and vty line unless another accounting method list is
applied on that line.
Use the no form of this command, NO AAA ACCOUNTING LOGIN
DEFAULT, to remove the accounting method list for login shell sessions.
This command causes the switch to revert to the authentication method
used by the local user database. In addition, it disables accounting on
every line that has the default accounting configuration.