Allied Telesis AT-FS970M Series - Manual (Page 1347)

AT-FS970M Switch Command Line User’s Guide
1347
The fields are described in Table 142.
Example
The following example displays the RMON alarms on the switch:
awplus# show rmon alarm
Table 142. SHOW RMON ALARM Command
Parameter Description
Alarm Index The ID number of the alarm.
Variable The MIB object the alarm is monitoring,
and the ID number of the statistics group
used to monitor the port and MIB object.
Interval The polling interval in seconds.
Alarm Type The alarm type. This is always “rising and
falling,” meaning the alarm has both a
rising threshold and a falling threshold.
Rising Threshold The rising threshold.
Event Index The ID number of the event the alarm
performs if the rising threshold is crossed.
Falling threshold The falling threshold.
Event index The ID number of the event the alarm
performs if the falling threshold is crossed.
Owner The name of the owner of the alarm. The
owner is Agent if no owner was specified
when the alarm was created.