Allied Telesis AT-FS970M Series - Manual (Page 1899)

1899
Appendix B
Management Software Default Settings
This appendix lists the factory default settings of the switch. The features
are listed in alphabetical order:
 “Boot Configuration File” on page 1901
 “Class of Service” on page 1902
 “Console Port” on page 1903
 “DHCP Relay” on page 1904
 “802.1x Port-Based Network Access Control” on page 1905
 “Enhanced Stacking” on page 1907
 “GVRP” on page 1908
 “IGMP Snooping” on page 1909
 “IGMP Snooping Querier” on page 1910
 “Link Layer Discovery Protocol (LLDP and LLDP-MED)” on page 1911
 “MAC Address-based Port Security” on page 1912
 “MAC Address Table” on page 1913
 “Management IP Address” on page 1914
 “Manager Account” on page 1915
 “Port Settings” on page 1916
 “RADIUS Client” on page 1917
 “Remote Manager Account Authentication” on page 1918
 “RMON” on page 1919
 “Secure Shell Server” on page 1920
 “sFlow Agent” on page 1921
 “Simple Network Management Protocol (SNMPv1, SNMPv2c and
SNMPv3)” on page 1922
 “Simple Network Time Protocol” on page 1923
 “Spanning Tree Protocols (STP, RSTP and MSTP)” on page 1924
 “System Name” on page 1926
 “TACACS+ Client” on page 1927
 “Telnet Server” on page 1928
 “VLANs” on page 1929