Allied Telesis AT-FS970M Series - Manual (Page 943)

AT-FS970M Switch Command Line User’s Guide
943
CONVERT DYNAMIC VLAN
Syntax
convert dynamic vlan
Parameters
None
Mode
VLAN Configuration mode
Description
Use this command to convert dynamic GVRP VLANs and dynamic GVRP
port assignments to static VLANs and static port assignments.
Example
This example converts dynamic GVRP VLANs and dynamic GVRP port
assignments to static VLANs and static port assignments on the switch:
awplus> enable
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)# convert dynamic vlan