Allied Telesis AT-FS970M Series - Manual (Page 656)

Chapter 42: DHCP Snooping Commands
656
SHOW IP DHCP SNOOPING INTERFACE
Syntax
show ip dhcp snooping interface port-list
Parameters
port-list
Indicates the list of ports. If no ports are specified, information for
all ports is displayed.
Mode
Privileged Exec mode
Description
Use this command to display DHCP snooping configuration and leases for
a port or a list of ports.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 166
Examples
This example displays DHCP snooping binding information for all of the
ports:
awplus> enable
awplus# show ip dhcp snooping interface
This example displays DHCP snooping interface information for ports 1
through 6:
awplus> enable
awplus# # show ip dhcp snooping interface port1.0.1-
port1.0.6
See Figure 126 on page 657 for a sample of this display. See Table 74 on
page 657 for an explanation of the parameters in this display.