Allied Telesis AT-FS970M Series - Manual (Page 1494)

Chapter 95: RADIUS and TACACS+ Client Commands
1494
SHOW TACACS
Syntax
show tacacs
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the configuration of the TACACS+ client on
the switch. An example of the information is shown in Figure 244.
Figure 244. SHOW TACACS Command
The fields are described in Table 155.
Table 155. SHOW TACACS Command
Parameter Description
Timeout The length of the time, in seconds, that
the switch waits for a response from a
TACACS+ server to an authentication
request. The default is 40 seconds. If
there is no response from any
authentication servers, the switch
reactivates the local manager accounts.
This parameter cannot be changed.
Server Host The IP address of a TACACS+ server on
your network.
TACACS+ Global Configuration
Timeout : 5 sec
Server Host : 149.123.154.12
Server Status : Alive
Server Host : 149.123.154.26
Server Status : Dead