ALFA OKIPAGE 20 - Manual (Page 14)

E–6 Chapter 1: Setting Up
Load the Paper Tray
1. Pull out the paper tray.
2. Adjust the rear and side paper guides before loading paper. This will help
to avoid paper jams.
3. Fan a stack of paper (up to 530 sheets of 20 lb. paper) and place it in the
tray under the tabs. Do not fill above the PAPER FULL marks.
4. Push the tray into the printer until it locks.
The Paper Tray Gauge
The paper tray gauge indicates the amount of paper left in the tray. This
eliminates having to open the tray to check how much paper remains.