ALFA OKIPAGE 20 - Manual (Page 16)

E–8 Chapter 1: Setting Up
Top Paper Exit
The top paper exit is the one normally used for routine printing.
• Printed pages feed face down into the bin on top of the printer
• Bin holds 250 sheets of 20 lb. paper
• Pages stack in the correct order
• When the bin is full, STACKER FULL REMOVE THE PAPER displays
in the control panel window and printing will stop until the paper is
removed
To use the top paper exit:
1. Lift out the paper catcher and pull it toward the front of the printer until it
stops.
2. Flip up the extender.
Rear Paper Exit
Use rear exit when printing on heavy paper, envelopes, labels, and transpar-
encies.
• Printed pages feed face up into the rear tray
• Tray holds a maximum of 100 sheets of 20 lb. paper or 10 envelopes
• Pages stack in reverse order
• To avoid paper jams, remove paper when rear exit tray is full.
To use rear paper exit:
Caution! Do not extend the rear exit tray while printing: a paper jam may
occur!
1. Pull the tray down.
2. Pivot out the extenders.