ALFA OKIPAGE 20 - Manual (Page 29)

Chapter 3: The Printer Menus E–21
PAGE LAYOUT1 (continued)
TOF POSITION
0.0 INCH
Range 0.0 to 1.0 INCH
Notes: Sets Top of Form in 0.1-inch incre-
ments. This determines the print start
position relative to the top of the paper.
LEFT MARGIN
0.0 INCH
Range 0.0 to 1.0 INCH
Notes: Shifts the left margin further to the
right.
Using the Level-2 Menu
The Level-2 menu includes selections that are
rarely changed once they are set. To access the
Level-2 menu:
1. Press ON-LINE to place the printer off-line.
2. Press and hold MENU 1/Menu 2 until you see
PRINT MODE on the display. Once you are in
the menu, press MENU 1/Menu 2 repeatedly
to advance through the Menu categories.
3. Press ENTER to select a category.
The current default setting displays.
4. Press
ᮣ
/Reset repeatedly until you see the
selection you want.
5. Press ENTER to set a selection as the default.
An asterisk (*) will appear to indicate the new
default setting.
Note: Some categories include a number of
items. In such categories, after you press
ENTER in step 3, press MENU 1/Menu 2
to advance to the next selection before
proceeding to step 4.
Summary of Level-2 Categories:
• PRINT MODE
• MEMORY USAGE
• AUTO OPERATION
• DARKNESS CONTROL
• POWER SAVING
• LOW TONER
• TONER SAVING
• CLEARABLE WARNINGS
• ERROR REPORT
• PARALLEL I/F
• RS232C SERIAL
• LANGUAGE
Level-2 Menu Settings
Level-1 Menu Categories (e.g., PRINT MODE ),
Items (e.g., RESOLUTION ) and Selections (e.g.,
600x1200 DPI , 300 DPI ) are summarized below:
default selections are in italic (e.g., 600 DPI ).
PRINT MODE
RESOLUTION
600 DPI
600x1200 DPI
300 DPI
Notes: Select print density in dots per inch.
When a print job is sent at a resolution
which is different from this menu
setting, it will automatically be
converted and printed at the value
selected in the print job.
MEMORY USAGE
FONT PROTECTION
AUTO
OFF
400 KB
Notes: HP PCL 6 mode: Sets the font cache
size. If you change settings, the printer
memory will be reconfigured and all
downloaded fonts and PCL macros
will be lost.
PostScript mode: Fixed at automatic:
other settings not implemented at this
time.
MEMORY FREE AREA
####KB/ReadOnly
Notes: Displays memory area available for
downloading fonts (cannot be changed
through the menu).